User Instructions Section 5847
Spec. Nos. 586505000 and 5865055000 (Model LMS1000) Issue AL, July 24, 2006
Chapter 3. Commands Page 3-313
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
TL1 COMMANDS, AUTONOMOUS
MESSAGES, AND ERROR CODES
The system can also operate as a Network Element (NE) in a Network Maintenance and
Administration (NMA) system. NMA is software developed by Bell Communications
Research (Bellcore) to run on an Operations System (OS). This system utilizes the
Transaction Language 1 (TL1) command language.
This section lists the specific TL1 commands and autonomous messages (in alphabetical
order) the system supports when the TL1 software option is furnished. A brief description
of each is provided. Also provided is a list of error codes for the TL1 commands
supported.
Note: The system does not currently support parameter grouping in TL1 commands.
Refer to the current issue of the following Bellcore publications for further information on
the NMA system and TL1 command language.
TR-NWT-000831
TR-NWT-000833
TR-NWT-000835
TR-NWT-000199
TA-NWT-000199
TA-NWT-000200
TA-NWT-001360
To Next Page
Loading...
Need help?
General
