Section 5847 User Instructions
Issue AL, July 24, 2006 Spec. Nos. 586505000 and 5865055000 (Model LMS1000)
Page 3-112 Chapter 3. Commands
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
NODE INITIO
Description: Permits the user to re-initialize the I/O hardware configuration of either the
Main Cabinet or an Expansion Cabinet. This operation causes the I/O hardware
configuration stored in nonvolatile memory to be replaced with the configuration of the
hardware actually installed.
Command Level: 6
Syntax: NODE INITIO [node_number]
Comments: A user may select a node to be re-initialized by its node number from a list
of nodes with application node numbers. Nodes that have not been configured with a
node number cannot be re-initialized.
Notes: This command does not work with any Main Cabinet, VPS MCA Interface, or
LPS MCA Interface Nodes.
"IO network is running." is displayed when the network is ready. The follow are displayed
if the network is not ready.
"IO network is adding nodes.
IO network commands not ready!"
Indicates a new IO network is being discovered.
"IO network is verifying nodes.
IO network commands not ready!"
Indicates a known network is being verified.
"IO network is failed.
IO network commands not ready!"
Indicates an IO network has failed and no communication to nodes is possible.
"IO network is not initialized.
IO network commands not ready!"
Only displayed for a very short time after a reset.
"IO network state is undefined!
IO network commands not ready!"
Only displayed for a very short time after a reset on a new system.
Related Commands: none
Example:
Command<6>: NODE INITIO
IO network is running.
Enter '0' for Main chassis
Or the number of a configured node shown below
Node# Name Spec. Number Ser.# Loc Echelon Id #
05 midddut 58212190001 12346 L 1A2B3C4D5F6A
X01 --- 58212190001 12346 R 1A2B3C4D5F6B
X02 --- 58212190002 12347 L 1A2B3C4D5F6C
To Next Page
Loading...
Need help?
General
