Section 5847 User Instructions
Issue AL, July 24, 2006 Spec. Nos. 586505000 and 5865055000 (Model LMS1000)
Page 3-308 Chapter 3. Commands
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
TRAPS ON
Description: Enable the system to send SNMP TRAPS.
Command Level: 6
Syntax: TRAPS ON
Comments: This enables the system to generate a TRAP when required. If traps are
enabled, all traps are sent to the configured hosts.
Notes: none
Related Commands: TRAPS
TRAPS ADD
TRAPS DELETE
TRAPS OFF
TRAPS VERSION
Example:
Command<6> : TRAPS ON
To Next Page
Loading...
Need help?
General
