Section 5847 User Instructions
Issue AL, July 24, 2006 Spec. Nos. 586505000 and 5865055000 (Model LMS1000)
Page 3-320 Chapter 3. Commands
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
EDIT-DATE_AND_TIME
(ED-DAT)
Referenced In: TA-NWT-000199, Issue 6, Supplement 1; pg. 3-18
General Description: Changes the LMS1000’s system date and/or time.
An entry is made in the LMS1000’s event log indicating this command was executed by
the current sessions user. The event description indicates that the date and/or time was
set through the TL1 interface.
Delayed activation is not allowed.
Related Commands: None
LMS1000 Access Level: 3
An error response with the error code PICC is returned if this command is entered by a
valid user whose level of access is less than the access level of this command.
LMS1000 Equivalent: none
LMS1000 Input Format Variations:
<aid>
The access identifier (<aid>) parameter does not apply. The only valid value for this
parameter is NULL. Invalid values received for this parameter return an error response
with the error code IIAC.
<date>
This is the value for the new date in the format YY-MM-DD.
YY last two digits of year from 00 to 99
MM month of the year ranging from 01 to 12
DD day of the month ranging from 01 to 31
Invalid values for this parameter return an error response with the error code IDNV.
<time>
This is the value for the new time in the format HH-MM-SS.
HH hour of the day in twenty-four hour format (00 to 23)
MM minutes of the hour from 00 to 59
SS seconds of the minute from 00 to 59
Invalid values for this parameter return an error response with the error code IDNV.
LMS1000 Response Format Variations: None
To Next Page
Loading...
Need help?
General
