Section 5847 User Instructions
Issue AL, July 24, 2006 Spec. Nos. 586505000 and 5865055000 (Model LMS1000)
Page 3-300 Chapter 3. Commands
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
SNMP OFF
Description: Disable SNMP access.
Command Level: 6
Syntax: SNMP OFF
Comments: This command disables all access to the unit via SNMP. The unit will not
respond to a SNMP request nor will any SNMP TRAP be sent.
Notes: Prevents access to the system through the Ethernet port via an SNMP browser.
Access to the system can be enabled by issuing the local command SNMP ON.
Related Commands: SNMP
SNMP GET
SNMP ON
SNMP SET
Example:
Command<6> : SNMP OFF
To Next Page
Loading...
Need help?
General
