Section 5847 User Instructions
Issue AL, July 24, 2006 Spec. Nos. 586505000 and 5865055000 (Model LMS1000)
Page 3-310 Chapter 3. Commands
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
TRAPS RETIRED
Description: Disable/Enable the systems ability to send SNMP Retired Alarm TRAPS.
Command Level: 6
Syntax: TRAPS RETIRED OFF
TRAPS RETIRED ON
Comments: This enables the system to send or disables the system from sending
Retired Alarms TRAPS. If Retired Alarms traps are disabled, no Retired Alarms will be
sent under any circumstances.
Notes: If TRAPS are disabled altogether via the TRAPS OFF command, Retired Alarms
TRAPS will not be sent regardless of the setting of the Retired Alarms TRAPS.
Related Commands: TRAPS
TRAPS ON
TRAPS OFF
Example:
Command<6> : TRAPS RETIRED OFF
To Next Page
Loading...
Need help?
General
