User Instructions Section 5847
Spec. Nos. 586505000 and 5865055000 (Model LMS1000) Issue AL, July 24, 2006
Chapter 3. Commands Page 3-53
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
CLR POWER
Description: Clears the power consumption data for a single or all function channels
configured for Power Metering.
Command Level: 4
Syntax: CLR POWER [function_channel_number]
CLR PO [function_channel_number]
Comments: Entering a function channel number after the command clears data for the
specified function channel only.
Notes: Future Power Metering reports are based on data collected after this command is
entered.
Available only if the Power Metering software option is installed.
Related Commands: POWER
Example:
Command<4>: CLR POWER
Power Stats cleared.
___________________________________________________________________________________
Command<4>: CLR POWER 1
Power Stats cleared.
To Next Page
Loading...
Need help?
General
