User Instructions Section 5847
Spec. Nos. 586505000 and 5865055000 (Model LMS1000) Issue AL, July 24, 2006
Chapter 3. Commands Page 3-281
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
USERS
Description: Lists each user and associated configuration information.
Command Level: 6
Syntax: USERS
USERS n
US
US n
Comments: none
Notes: When the command is entered with a command modifier, the active/inactive
state for that user is shown. When the command is entered with no command modifier,
inactive users are also listed along with the configurations of all active users.
Related Commands: Set Users
Example:
Command<6>: USER 8
USER NO. 8 CONFIGURATION – User is: inactive
Name: User #8 Occurred Alarm Report: No
Password: 8 Retired Alarm Report: No
Access Level: 6 Persistent Alarm Report: No
Callback: No Persistent Alarm Report Period: 0m
Mechanized Interface: No Daily Report: No
Report Mode: Off Daily Report Command:
Report Device: Modem Daily Report Time:
Report Retry Time: 15m
Primary Phone:
Primary E-mail:
Primary Phone Valid Days: 1-7
Primary Phone Valid Hours: 00-23
Alternate Phone:
Alternate E-mail:
USER NO. 8 CHANNELS: None
___________________________________________________________________________________
Command<6>: USER
. . .
USER NO. 2 CONFIGURATION – User is: active
Name: User #2 Occurred Alarm Report: No
Password: 2 Retired Alarm Report: No
Access Level: 2 Persistent Alarm Report: No
Callback: No Persistent Alarm Report Period: 0m
Mechanized Interface: No Daily Report: No
Report Mode: Off Daily Report Command:
Report Device: Modem Daily Report Time:
To Next Page
Loading...
Need help?
General
