User Instructions Section 5847
Spec. Nos. 586505000 and 5865055000 (Model LMS1000) Issue AL, July 24, 2006
Chapter 3. Commands Page 3-299
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
SNMP GET
Description: Set the SNMP "get" community name.
Command Level: 6
Syntax: SNMP GET [community name]
Comments: Enter the community name. The GET community name provides a simple
means of authentication for all SNMP GET, GETNEXT, and GETBULK (in the case of
SNMP 2c) operations.
Notes: The string may not contain more than 128 characters. SNMP TRAPS will be
sent using this string as their community name.
Related Commands: SNMP
SNMP OFF
SNMP ON
SNMP SET
Example:
Command<6> : SNMP GET public
To Next Page
Loading...
Need help?
General
