Section 5847 User Instructions
Issue AL, July 24, 2006 Spec. Nos. 586505000 and 5865055000 (Model LMS1000)
Page 3-302 Chapter 3. Commands
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
SNMP SET
Description: Set the SNMP "set" community name.
Command Level: 6
Syntax: SNMP SET [community name]
Comments: Enter the community name. The PUT community name provides a simple
means of authentication for all SNMP PUT operations.
Notes: The string may not contain more than 128 characters.
Related Commands: SNMP
SNMP GET
SNMP OFF
SNMP ON
Example:
Command<6> : SNMP SET private
To Next Page
Loading...
Need help?
General
