User Instructions Section 5847
Spec. Nos. 586505000 and 5865055000 (Model LMS1000) Issue AL, July 24, 2006
Chapter 2. Operating LMS1000 Page 2-13
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
ACCESSING LMS1000 VIA TELNET AND TFTP
Users can access the system via Telnet and TFTP through the Ethernet Port. It is
beyond the scope of this manual to describe Telnet and TFTP interface operation. Refer
to external documentation for a further understanding of the these interfaces.
ACCESSING LMS1000 VIA SNMP
(IF SNMP SOFTWARE OPTION IS INSTALLED)
Users can access the system via SNMP (if SNMP option installed) through the Ethernet
Port. It is beyond the scope of this manual to describe SNMP interface operation. Refer
to external documentation for a further understanding of the SNMP interface.
Management Information
Base (MIB) User Interface
The SNMP Interface allows for the control of elements in the system via a user supplied
SNMP Manager.
Users must be familiar with their MIB browser and know how to access the information in
the LMS SNMP Interface using their browser. They must also be able to obtain a TCP/IP
address for the interface and obtain at least one TCP/IP address to which SNMP traps
are sent.
The system operates using standard IP SNMPv1 and SNMPv2 protocols.
To Next Page
Loading...
Need help?
General
