Emerson LMS1000 User Manual

Section 5847 User Instructions
Issue AL, July 24, 2006 Spec. Nos. 586505000 and 5865055000 (Model LMS1000)
Page 3-274 Chapter 3. Commands
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
STATUS
Description: Displays the status page.
Command Level: 1
Syntax: STATUS
Comments: After entering the command STATUS, the user can review the titles of the
status pages. After review, the user is prompted to enter a status page number.
Entering a page number displays the selected page. Each of the eight status pages
permit convenient review of several related channel scans. The channels listed on a
status page are determined by the user, and can include the channel header information
if desired.
Notes: none
Related Commands: SET STATUS
Example:
Command<1>: status
STATUS PAGES:
Pg 1: PBD02 STATUS Pg 9:
Pg 2: Pg 10:
Pg 3: Pg 11:
Pg 4: Pg 12:
Pg 5: Pg 13:
Pg 6: Pg 14:
Pg 7: Pg 15:
Pg 8: Pg 16:
Which page (1-16) ? 1
PBD02 STATUS
Chan Description Value Unit Alarm1 Alarm2 Alarm3 Alarm4
A0001 PBD02 LOAD 11 +0.0 Amps N 0 N 0 N 0 N 0
A0002 PBD02 LOAD 12 +0.1 Amps N 0 N 0 N 0 N 0
A0003 PBD02 LOAD 13 +0.0 Amps N 0 N 0 N 0 N 0
A0004 PBD02 LOAD 14 +0.0 Amps N 0 N 0 N 0 N 0

Emerson LMS1000 Specifications

General

Brand	Emerson
Model	LMS1000
Category	Measuring Instruments
Language	English