Section 5847 User Instructions
Issue AL, July 24, 2006 Spec. Nos. 586505000 and 5865055000 (Model LMS1000)
Page 3-72 Chapter 3. Commands
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
DAC SET
Description: Adds / changes a User and/or Access Code stored in the Door Access
Controller (DAC). Available only if the DAC Interface Option is installed.
Command Level: 6
Syntax: DAC SET
Comments: All Access Codes are limited to five-digit numbers.
Notes: A value of zero indicates that this entry on the Access Code list is not in use.
Related Commands: DAC DEL, DAC LIST, DAC SET LOCK OFF, DAC SET LOCK
ON, DAC STATUS, LOCK, UNLOCK
Example:
Command <6>: DAC SET
DAC Code #: [Code #]
Access PIN: [PIN#]
Save Changes (Y or N): [Y|N]
DAC Code #[Code #] has been added/changed with PIN [PIN#]
___________________________________________________________________________________
Command <6>: DAC ADD [User #] [PIN#]
[User] has been added with PIN [PIN#]
To Next Page
Loading...
Need help?
General
