Section 5847 User Instructions
Issue AL, July 24, 2006 Spec. Nos. 586505000 and 5865055000 (Model LMS1000)
Page 3-52 Chapter 3. Commands
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
CLR MAIL
Description: Displays any existing mail messages and prompts the user to delete the
mail entry.
Command Level: 1
Syntax: CLR MAIL
Comments: Before you clear the mail (you are sending), make sure that everyone has
read the mail. That is, there should be no "Send To" numbers that are not also in the
"Read By" numbers (the numbers refer to the user number 1-8). When another user
reads your mail, his user number will be stored as part of the "Read By" numbers. His
user number will still appear in the "Send To" numbers unless he specifically indicates
that he is done with your mail. As long as a user’s number appears as part of the "Send
To" numbers, he will be notified every time he logs onto the system that he has mail.
Notes: none
Related Commands: MAIL, SET MAIL
Example:
Command<1>: CLR MAIL
Mail Setup
Line 1: FRED,
Line 2: THE DIESEL IS WORKING GREAT.
Line 3: THANKS FOR YOUR HELP.
Send To: 1
Read By: 3
Clear this mail (Y or N) ? y
Mailed cleared!
To Next Page
Loading...
Need help?
General
