Section 5847 User Instructions
Issue AL, July 24, 2006 Spec. Nos. 586505000 and 5865055000 (Model LMS1000)
Page 3-162 Chapter 3. Commands
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
SET DATE
Description: Permits the setting of the system date.
Command Level: 3
Syntax: SET DATE
Comments: The current date is displayed, and can be changed if desired by using the
format mm/dd/yy.
Notes: This command will affect the dates associated with any statistics that may be
saved in memory. Also, any alarms that clear after the date is set will have the new date
stored as part of their log entry, which could be misleading. Any user changing the date
will have his name and this action recorded in the event log.
Related Commands: DATE
Example:
Command<3>: SET DATE
Date is 01/16/01.
Use Format MM/DD/YY
To Next Page
Loading...
Need help?
General
