Emerson LMS1000 User Manual

Section 5847 User Instructions
Issue AL, July 24, 2006 Spec. Nos. 586505000 and 5865055000 (Model LMS1000)
Page 3-16 Chapter 3. Commands
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
SNMP Commands
This section provides an alphabetical list of all SNMP commands available when the
SNMP software option is installed, with a short description of each command.
SNMP Commands Description
SNMP
display the current value of the SNMP options
SNMP GET <comm name>
set the SNMP GET community name
SNMP OFF
disable SNMP access
SNMP ON
enable SNMP access
SNMP SET <comm name>
set the SNMP SET community name
TRAPS
display the SNMP TRAP information
TRAPS ADD <n>
add a new SNMP Trap recipient to the list of TRAP hosts
TRAPS DELETE <n>
remove a host address from the list of TRAP hosts
TRAPS OCCURRED
disable/enable the systems ability to send SNMP Occurred Alarm TRAPS
TRAPS OFF
disable the systems ability to send SNMP TRAPs
TRAPS ON
enable the system to send SNMP TRAPs
TRAPS PERSISTENT
Disable/Enable the systems ability to send SNMP Persistent Alarm TRAPS or
set the Persistent Alarms reporting interval
TRAPS RETIRED
Disable/Enable the systems ability to send SNMP Retired Alarm TRAPS
TRAPS VERSION
change the version of SNMP TRAPs sent by the system

Emerson LMS1000 Specifications

General

Brand	Emerson
Model	LMS1000
Category	Measuring Instruments
Language	English