Emerson LMS1000 User Manual

Section 5847 User Instructions
Issue AL, July 24, 2006 Spec. Nos. 586505000 and 5865055000 (Model LMS1000)
Page 3-322 Chapter 3. Commands
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
EDIT-USER-SECURITY
(ED-USER-SECU)
Referenced In: TR-NWT-000835, Issue 3; pg. 3-59
General Description: Edits the user identifier (<uid>) parameter (i.e., LMS1000 user
name), privilege identifier (<pid>) parameter (i.e., LMS1000 user password), calling
identifier (<cid>) parameter (i.e., LMS1000 user primary phone number), and user access
privilege (<uap>) parameter (i.e., LMS1000 user access level) of the specified user.
When executed, the command sets the NAME, PASSWORD, PRIMARY PHONE, and
ACCESS LEVEL attributes of the specified user’s LMS1000 user configuration to the new
values.
An entry is made in the LMS1000’s event log indicating this command was executed by
the current sessions user. The event description indicates that the specified user’s
LMS1000 user parameters were edited.
Related Commands: None
LMS1000 Access Level: 6
An error response with the error code PICC is returned if this command is entered by a
valid user whose level of access is less than the access level of this command.
LMS1000 Equivalent: None
LMS1000 Input Format Variations:
<aid>
The access identifier (<aid>) parameter is the same value as the user identifier (<uid>)
parameter for the user whose parameters are being edited. Invalid values received for
this parameter return an error response with the error code IIAC.
<uid>
The user identifier (<uid>) parameter determines the new user identifier which replaces
the current one. This parameter is the new NAME attribute for the specified user’s
LMS1000 user configuration. Invalid values received for this parameter return an error
response with the error code IDNV. If the entered value for this parameter matches an
existing user identifier for another user, an error response with the error code PIUI is
returned.
<pid>
The privilege identifier (<pid>) parameter determines the new privilege identifier which
replaces the current one. This parameter is the new PASSWORD attribute for the
specified user’s LMS1000 user configuration. The LMS1000 allows a maximum of eight
characters for a password. At least two characters must be non-alpha, and at least one
character must be a symbol. (Valid symbols are the ‘#’, ‘%’, and ‘+’ characters.) Invalid
values received for this parameter return an error response with the error code IDNV. If
the entered value for this parameter matches an existing privilege identifier for another
user, an error response with the error code PIUI is returned.

Emerson LMS1000 Specifications

General

Brand	Emerson
Model	LMS1000
Category	Measuring Instruments
Language	English