Emerson LMS1000 User Manual

Section 5847 User Instructions
Issue AL, July 24, 2006 Spec. Nos. 586505000 and 5865055000 (Model LMS1000)
Page 1-2 Chapter 1. Introduction
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
with the VPS or LPS. Separate analog, binary, and relay circuit cards do not have to
be supplied for this interface. In a VPS, one simple cable connection between the
LMS1000 and VPS completes the interconnections required. The LMS is factory
integrated in an LPS Power System. Analog, binary, relay, and temperature circuit
cards may be provided to monitor equipment external to the VPS or LPS.
Note that Spec. No. 582140000 LPS Power System does not use the LMS
Cabinets. The LMS is factory integrated into the LPS Power System. LMS I/O
circuit card mounting positions are provided inside a 582140000 LPS Power
System.
• Available software options include…
WEB Interface
Power Metering
Energy Management
Rectifier/PCU Sequencing
TL1/X.25
SNMP
TL1 (over Ethernet)
Gateway Port
Note: The LMS Energy Management and Sequencing features are not for use in an
LPS Power System.
• Available specialty interfaces include…
Door Access Controller Interface
External GPS Modem Interface
AC Analyzer Interface
• Refer to SAG586505000/SAG586505500 (System Application Guide) for additional
information. The SAG can be accessed via the CD (Electronic Documentation
Package) furnished with your system.
LMS1000 CONSISTS OF...
• a Main Cabinet which holds up to ten input/output circuit cards, in a cabinet size that
occupies two 19" or 23" relay rack spaces. For system expansion and/or to monitor
points at other locations, Supplemental (Expansion) Cabinets are available. Each
Expansion Cabinet holds up to ten input/output circuit cards, in a cabinet size that
occupies two 19" or 23" relay rack spaces. Also available are Expansion Assemblies
which provide an input circuit card equipped with a fixed number of analog and binary
input points in a sheetmetal housing. These assemblies can be mounted inside
customer equipment. The Main Cabinet, Expansion Cabinets, and Expansion
Assemblies are interconnected via the LMS network.
• a CPU circuit card, optional modem circuit card, and any combination of optional
analog, binary, relay, and temperature input/output (I/O) circuit cards. Analog, binary,
and temperature circuit cards monitor a variety of inputs. The relay circuit card
provides Form-C relay contacts for connection to external alarms and control circuits.
The CPU circuit card also contains programmable LED's for local indication of alarms
or occurrences.

Emerson LMS1000 Specifications

General

Brand	Emerson
Model	LMS1000
Category	Measuring Instruments
Language	English