Section 5847 User Instructions
Issue AL, July 24, 2006 Spec. Nos. 586505000 and 5865055000 (Model LMS1000)
Page 3-304 Chapter 3. Commands
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
TRAPS ADD
Description: Add a new SNMP Trap recipient to the list of TRAP hosts.
Command Level: 6
Syntax: TRAPS ADD [address]
Comments: Enter the address in the format nnn.nnn.nnn.nnn, where 0 ≤ nnn ≤ 255.
This adds a new trap recipient to the list of hosts to which TRAPs will be sent. A
maximum of 32 host address may appear on this list.
Notes: All traps will be sent to all hosts on this list.
A host may not appear on this list more than once.
The addresses 0.0.0.0 and 255.255.255.255 are not permissible addresses.
Related Commands: TRAPS
TRAPS DELETE
TRAPS OFF
TRAPS ON
TRAPS VERSION
Example:
Command<6> : TRAPS ADD 198.137.240.91
To Next Page
Loading...
Need help?
General
