Emerson LMS1000 User Manual

User Instructions Section 5847
Spec. Nos. 586505000 and 5865055000 (Model LMS1000) Issue AL, July 24, 2006
Chapter 3. Commands Page 3-57
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
CMD
Description: Lists each of the eight programmable commands, if they are used.
Command Level: 6
Syntax: CMD
Comments: Using programmable commands is analogous to using macros or batch
processing. Their use can simplify the task of extracting data from the system.
Notes: Each command can consist of up to eight standard commands. When the name
of a programmable command is entered, all of its commands are automatically
performed, without having to manually prompt the system to perform each task.
Related Commands: SET CMD
Example:
Command<6>: cmd
Command 1 name: LOADS
Command 1 access level: 1
Command 1 line 1: SCAN RECTIFIER
Command 1 line 2: SCAN LOAD
Command 1 line 3: SCAN CURRENT

Emerson LMS1000 Specifications

General

Brand	Emerson
Model	LMS1000
Category	Measuring Instruments
Language	English