Emerson LMS1000 User Manual

Section 5847 User Instructions
Issue AL, July 24, 2006 Spec. Nos. 586505000 and 5865055000 (Model LMS1000)
Page 3-316 Chapter 3. Commands
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
ACTIVATE-USER
(ACT-USER)
Referenced In: TR-NWT-000835, Issue 3; pg. 3-23
General Description: Sets up a session with the system (i.e., logging into the system).
An entry is made in the event log indicating that a user session was established and
identifying the user who executed the command.
Related Commands: None
LMS1000 Access Level: NA
LMS1000 Equivalent: None
LMS1000 Input Format Variation:
<aid>
The access identifier (<aid>) parameter is the same value as the user identifier (<uid>)
parameter for the user attempting to gain access to the system. The user identifier
parameter is the NAME attribute from this user’s LMS1000 user configuration. Invalid
values received for this parameter return an error response with the error code IIAC.
<pid>
The personal identifier (<pid>) parameter is the PASSWORD attribute from this user’s
LMS1000 user configuration.
LMS1000 Response Format Variation: The "e" (date and time of last session
established by this user) and "f" (number of unsuccessful session attempts since last
session) parameters are currently not supported in LMS1000.

Emerson LMS1000 Specifications

General

Brand	Emerson
Model	LMS1000
Category	Measuring Instruments
Language	English