Emerson LMS1000 User Manual

Section 5847 User Instructions
Issue AL, July 24, 2006 Spec. Nos. 586505000 and 5865055000 (Model LMS1000)
Page 3-292 Chapter 3. Commands
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
IP GATEWAY
Description: Set the unit’s gateway address.
Command Level: 6
Syntax: IP GATEWAY [address]
Comments: Enter the address in the format nnn.nnn.nnn.nnn, where 0 ≤ nnn ≤ 255.
This command sets the address of the gateway of the network on which the unit resides.
Notes: The gateway address must be a valid IP address and must not be
255.255.255.255.
Related Commands: IP
IP ADD
IP ADDRESS
IP DELETE
IP NETMASK
Example:
Command<6> : IP GATEWAY 216.32.74.1

Emerson LMS1000 Specifications

General

Brand	Emerson
Model	LMS1000
Category	Measuring Instruments
Language	English