Emerson LMS1000 User Manual

Section 5847 User Instructions
Issue AL, July 24, 2006 Spec. Nos. 586505000 and 5865055000 (Model LMS1000)
Page 3-200 Chapter 3. Commands
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
SET LPS SYSTEM NAGTIMER
Description: Sets the LPS "nag minutes (audible alarm cutoff reset time period)" value.
Command Level: 4
Syntax: SET LPS SYSTEM NAGTIMER
SE LP SY NA
Comments: The current value is displayed, followed by a prompt to enter a new value.
Notes: The following message is displayed if the setting was not accepted by the MCA.
Not Changed!
Related Commands: none
Example:
Command<6>: set lps sys nag
Audible Silent Time: 15 min.
Audible Silent Time: 30
Audible Silent Time NOT CHANGED!
___________________________________________________________________________________
Command<6>: set lps sys nag
Audible Silent Time: 15 min.
Audible Silent Time: 10
New Audible Silent Time Accepted.

Emerson LMS1000 Specifications

General

Brand	Emerson
Model	LMS1000
Category	Measuring Instruments
Language	English