Section 5847 User Instructions
Issue AL, July 24, 2006 Spec. Nos. 586505000 and 5865055000 (Model LMS1000)
Page 3-290 Chapter 3. Commands
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
IP ADDRESS
Description: Set the Unit's IP address.
Command Level: 6
Syntax: IP ADDRESS [address]
Comments: Enter the address in the format nnn.nnn.nnn.nnn, where 0 ≤ nnn ≤ 255.
The address must be a valid address and must not be 255.255.255.255.
Notes: An IP address of 0.0.0.0 will prevent an Ethernet access to the unit.
Related Commands: IP
IP ADD
IP DELETE
IP GATEWAY
IP NETMASK
Example:
Command<6> : IP ADDRESS 216.32.74.51
To Next Page
Loading...
Need help?
General
