Emerson LMS1000 User Manual

User Instructions Section 5847
Spec. Nos. 586505000 and 5865055000 (Model LMS1000) Issue AL, July 24, 2006
Chapter 3. Commands Page 3-91
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
HELP VORTEX
Description: Lists all Vortex Interface commands that are available at the current level
with a brief description.
Command Level: NA
Syntax: HELP VORTEX
HELP V
Comments: Only commands available to the current user are listed. The list in the
example is for a user that has access to level 6 commands.
Notes: The commands preface by the words SET VORTEX (SET V) can be viewed by
entering the word SET VORTEX (SET V) followed by a question mark.
To view the help definition for a single command, enter the command followed by a
space then a question mark.
Related Commands: HELP, MENU
Example:
Command<6>: HELP VORTEX
ALARMS VORTEX list active Power System alarms
ALARMS VORTEX LVD list active LVD alarms
ALARMS VORTEX MCA list active MCA alarms
ALARMS VORTEX PCU<n> list active PCU alarms
ALARMS VORTEX SHUNT list active SHUNT alarms
ALARMS VORTEX SUBSYSTEM list active subsystem type alarms
ALARMS VORTEX SYSTEM list active system type alarms
DOWNLOAD VORTEX dump Vortex Power System configuration
using XMODEM protocol
PRCONFIG VORTEX list settings and equipment inventory
PRCONFIG VORTEX INVENTORY list equipment inventory
PRCONFIG VORTEX SETTINGS list settings
SCAN VORTEX list present status of Vortex Power System
SCAN VORTEX LVD list present status of LVD circuits
SCAN VORTEX MCA list present status of MCA
SCAN VORTEX PCU<n> list present status of specified PCU
SCAN VORTEX SUBSYSTEM list present status of subsystem data
SCAN VORTEX SYSTEM list present status of system data
SET VORTEX INTERFACE Enable/Disable Vortex interface
SET VORTEX LVD<n<t>> DISCONNECT set specified LVD disconnect
voltage settings
SET VORTEX LVD RECONNECT set LVD reconnect voltage setting
SET VORTEX MESSAGE MCA set MCA custom message
SET VORTEX MESSAGE PCU<n> set specified PCU custom message
SET VORTEX PASSWORD set MCA logon password
SET VORTEX PCU<n> turn specified PCU On or Off
SET VORTEX SYSTEM 25APLACES set system number of 25A Places

Emerson LMS1000 Specifications

General

Brand	Emerson
Model	LMS1000
Category	Measuring Instruments
Language	English