Emerson LMS1000 User Manual

User Instructions Section 5847
Spec. Nos. 586505000 and 5865055000 (Model LMS1000) Issue AL, July 24, 2006
Chapter 3. Commands Page 3-101
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
MODE
Description: This command is only available if the TL1 software option is installed in the
system. Displays the configuration of the TL1 port settings.
Command Level: 6
Syntax: MODE
MOD
Comments: The "Auto logon user:" attribute shows the number of the user who is
automatically logged on by the system. The configuration of the entered user determines
the access level of the user session, and is used in determining when a report must be
sent.
Notes: The "Auto logon user:" attribute is only displayed if the "Auto logon:" attribute is
set to "Enabled".
Related Commands: SET MODE
Example:
TL1/X.25 Software Option Installed
Command<6>: MODE
TL1 Mode: Direct
TL1/X.25 Comm Port Setting: 9600, n, 8, 1
Session Timeout: 600 min
Auto logon: Enabled
Auto logon user: User #7
AID delimiter: Yes
TL1 (over Ethernet) Software Option Installed
Command<6>: MODE
TL1 Mode: Telnet
TCP Keepalive: Enabled
Port: 2020
Session Timeout: 600 min
Auto logon: Enabled
Auto logon user: User #7
AID delimiter: Yes

Emerson LMS1000 Specifications

General

Brand	Emerson
Model	LMS1000
Category	Measuring Instruments
Language	English