Huawei SmartAX MA5600T User Manual

1.3.12 Checking the Status of the Upstream Port
This topic describes how to check whether the upstream port is in the normal state.
Procedure
Step 1 Follow the steps below to check the status of the upstream port.
l If the control board is adopted for upstream transmission, do as follows:
1. For the MCU control board, run the interface mcu command to enter the MCU mode.
For other control boards, run the interface scu command to enter the SCU mode.
2. Run the display port state all command to check whether the upstream port is in the
normal state.
l If the upstream board is adopted for upstream transmission, do as follows:
1. Run the interface giu command to enter the GIU mode.
2. Run the display port state all command to check whether the upstream port is in the
normal state.
----End
Result
The upstream port is in the normal state. That is, the upstream port is in the active state and the
link is in the online state. If the optical port is adopted for upstream transmission, Optic
Status is displayed as normal.
1.3.13 Checking the Status of the Service Port
This topic describes how to check whether the service port is in the normal state.
Prerequisites
NOTE
The MA5600T/MA5603T/MA5608T provides various service ports. The following only describes how to
check the status of an ADSL2+ port and a GPON port.
Procedure
Step 1 Follow the steps below to check the status of the service port.
l If the user port is an ADSL2+ port:
1. Run the interface adsl command to enter the ADSL mode.
2. Run the display port state command to check whether the service port is in the normal
state.
l If the user port is a GPON port:
1. Run the interface gpon command to enter the GPON mode.
2. Run the display port state command to check whether the service port is in the normal
state.
----End
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
1 Commissioning
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
75

Huawei SmartAX MA5600T Specifications

General

Brand	Huawei
Model	SmartAX MA5600T
Category	Control Unit
Language	English