About This Document
Intended Audience
This document describes the commissioning of the basic functions provided by the device in
terms of hardware, software, interconnection, and maintenance and management to ensure that
the device runs in a stable and reliable state. This document describes the configuration
procedures of various services supported by the MA5600T/MA5603T/MA5608T in terms of
configuration method and configuration example.
This document helps to learn the commissioning flows, commissioning methods, and
configuration procedures of various services of the MA5600T/MA5603T/MA5608T.
This document is intended for:
l Installation and commissioning engineers
l System maintenance engineers
l Data configuration engineers
Symbol Conventions
The following symbols may be found in this document. They are defined as follows
Symbol Description
DANGER indicates a hazard with a high level or medium
level of risk which, if not avoided, could result in death or
serious injury.
WARNING indicates a hazard with a low level of risk
which, if not avoided, could result in minor or moderate
injury.
CAUTION indicates a potentially hazardous situation that,
if not avoided, could result in equipment damage, data loss,
performance deterioration, or unanticipated results.
TIP indicates a tip that may help you solve a problem or
save time.
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide About This Document
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
ii
To Next Page
Loading...
Need help?
General
