9 FTTH Configuration
About This Chapter
This section describes the configurations of Internet access, voice, broadband TV (BTV), and
VoD services in fiber to the home (FTTH) networking scenarios.
9.1 FTTH Service Overview
This topic describes FTTH service from basic concepts, network scenarios, typical
configurations, and ONT capability sets to provide necessary background information for FTTH
service configuration in different scenarios.
9.2 Basic Concepts
This section describes basic concepts related to the fiber to the home (FTTH) solution from the
user side to the network side on FTTH networking using PON and P2P upstream transmission,
respectively.
9.3 Networking Scenarios and Hardware Configurations (GPON)
This section describes fiber to the home (FTTH) networking scenarios and hardware
configurations of an optical line terminal (OLT) and optical network terminals (ONTs).
9.4 Networking Scenarios and Hardware Configurations (P2P)
This section describes fiber to the home (FTTH) networking scenarios and hardware
configurations of an optical line terminal (OLT) and optical network terminals (ONTs).
9.5 Reference of GPON ONT Capability Sets
This topic provides common GPON ONT capability sets of Huawei, serving as a reference for
parameter configuration when an ONT is added offline.
9.6 Principle of FTTH Data Plan
9.7 GPON Access: Configuring FTTH Service
This topic describes how to configure the Internet access service, voice service and BTV service
and VoD service in GPON access mode in FTTH network scenario.
9.8 P2P Access: Configuring FTTH Service
Users connected to the OLT through an ONT, and are therefore provided with the Internet, VoIP,
and IPTV service through a same port.
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
9 FTTH Configuration
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
546
To Next Page
Loading...
Need help?
General
