Huawei SmartAX MA5600T User Manual

1.6.3 Software Package Settings
This topic provides the default software package settings of the MA5600T/MA5603T/
MA5608T.
1.6.3.1 Factory Default of the xDSL Line Profile
The following Table 1-50, Table 1-51, Table 1-52 list the factory defaults of the xDSL line
profile on the MA5600T/MA5603T/MA5608T.
Table 1-50 ADSL line profile
Profile
Index
Profile Parameter Factory Default
1 DEFVA
L
Transmission mode T1.413
ETSI
G.992.1(Annex A/B/C)
G.992.2(Annex A/C)
G.992.3(Annex A/B/I/J/L/M)
G.992.4(Annex A/I)
G.992.5(Annex A/B/I/J/M)
Trellis mode Enable
Bit swap downstream Enable
Bit swap upstream Enable
Form of transmit rate adaptation
downstream
AdaptAtStartup
Form of transmit rate adaptation
upstream
AdaptAtStartup
Target SNR margin downstream
(0.1dB)
60
Minimum SNR margin downstream
(0.1dB)
0
Maximum SNR margin
downstream(0.1dB)
160
Target SNR margin upstream
(0.1dB)
60
Minimum SNR margin upstream
(0.1dB)
0
Maximum SNR margin upstream
(0.1dB)
160
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide 1 Commissioning
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
202

Huawei SmartAX MA5600T Specifications

General

Brand	Huawei
Model	SmartAX MA5600T
Category	Control Unit
Language	English