13.3.4.9 Verifying Services
This topic describes how to verify the PRA PBX service by testing calls.
Prerequisites
The PRA PBX access service has been deployed.
Procedure
Step 1 Test calls between users connected to the PRA PBX according to table 1.
Step 2 Test calls from a user connected to the PRA PBX to an MGC user according to table 1.
Step 3 Test calls from an MGC user to a user connected to the PRA PBX according to table 1.
Table 13-9 PRA PBX access service verification
Categ
ory
Test Calls Between
Users Connected to
the PRA PBX
Test Calls from a User
Connected to the PRA
PBX to an MGC User
Test Calls from an MGC
User to a User
Connected to the PRA
PBX
Prereq
uisites
1. User A and user B
access the network
through the PRA
PBX and both
users have been
registered.
2. User A and user B
are idle.
1. User A accesses the
network through the
PRA PBX and has been
registered.
2. User B is a common
MGC user and has been
registered.
3. User A and user B are
idle.
1. User A is a common
MGC user and has been
registered.
2. User B accesses the
network through the
PRA PBX and has been
registered.
3. User A and user B are
idle.
Test
proced
ure
1. User A calls user
B.
2. User B answers the
call. Check the call
between user A
and user B.
3. User A releases the
call.
The same as that in the "Test
Calls Between Users
Connected to the PRA
PBX" column
The same as that in the
"Test Calls Between Users
Connected to the PRA
PBX" column
Expect
ed
result
1. User B hears the
ringing tone.
2. The call is set up.
3. The call is
released.
The same as that in the "Test
Calls Between Users
Connected to the PRA
PBX" column
The same as that in the
"Test Calls Between Users
Connected to the PRA
PBX" column
----End
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
13 FTTO Configuration (Large-sized Enterprise Access)
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1327
To Next Page
Loading...
Need help?
General
