Figure 19-2 Configuring the IPv6 address on the LAN side
Configuring the Static IPv6 Route on the Gateway ONT
The gateway ONT can be configured with the static IPv6 route after IPv6 is introduced. For
details, see Figure 19-3.
Figure 19-3 Configuring the IPv6 static route
19.3 Configuring IPv6 Services in the FTTB/C (No HGWs)
Scenario
This section describes the methods for configuring IPv6 services in the FTTB/C (No HGWs)
scenario.
19.3.1 Application Scenarios
The FTTB/C (no HGW) networking supports the access of IPv6 HSI services. Generally, no
IPTV services will be deployed when there is no HGW.
As shown in Figure 19-4, the ONU, which is installed in a corridor or street optical distribution
box, transmits services to users through category-5 cables (LAN access) or twisted pairs (xDSL
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
19 IPv6 Configuration
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1884
To Next Page
Loading...
Need help?
General
