huawei(config-mvlan100)#igmp multicast-vlan member port 0/2/2
huawei(config-mvlan100)#igmp multicast-vlan member port 0/2/3
Step 14 Configure the subtending multicast service.
In the MSTP ring network, MA5600T/MA5603T/MA5608T-1 is subtended with MA5600T/
MA5603T/MA5608T-3, and MA5600T/MA5603T/MA5608T-3 is subtended with MA5600T/
MA5603T/MA5608T-4. According to the data plan, MA5600T/MA5603T/MA5608T-4
provides the multicast service. In this way, it is necessary to configure the multicast subtending
on MA5600T/MA5603T/MA5608T-1 first.
1. Add the upstream port.
The upstream port is already added in Step 13.3. It is unnecessary to configure it again.
2. Configure the IGMP proxy.
The IGMP proxy is already configured in Step 13.3. It is unnecessary to configure it again.
3. Configure the program library.
The program library is already configured in Step 13.3. It is unnecessary to configure it
again.
4. Configure the multicast for the subtending port.
l Specify a subtending port.
huawei(config-mvlan100)#quit
huawei(config)#btv
huawei(config-btv)#igmp cascade-port 0/19/0
huawei(config-btv)#igmp cascade-port 0/19/1
l Modify the subtending port.
huawei(config-btv)#igmp cascade-port modify 0/19/0 static enable
huawei(config-btv)#igmp cascade-port modify 0/19/1 static enable
Step 15 Save the data.
huawei(config-btv)#quit
huawei(config)#save
----End
5.4 Configuring MA5600T/MA5603T/MA5608T-2
This topic describes how to configure MA5600T/MA5603T/MA5608T-2.
Procedure
Step 1 Confirm the board.
huawei>enable
huawei#config
huawei(config)#board confirm 0
Step 2 Configure the NMS.
1. Configure the IP address of the inband NMS interface.
l Create the NMS VLAN.
huawei(config)#vlan 10 standard
l Add the upstream port.
huawei(config)#port vlan 10 0/19 0-1
l Enter NMS VLAN interface mode.
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
5 Configuration Example of MSTP Subtending Network
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
455