Item Step Description
OLT 9.7.1.12 Verifying Services The OLT provides remote verification
methods including ONT PPPoE/DHCP
dialup emulation and call emulation for
configuration and commissioning engineers
to verify services remotely after service
configuration, avoiding a second on-site
operation.
9.7.1.3 Adding an ONT to an OLT
Services can be configured for an ONT only after the ONT is successfully added to an OLT.
Data Plan
Table 9-2 Data plan
Item Data
DBA profile Profile name: ftth_dba
Profile type: type3
Assured bandwidth: 8 Mbit/s
Maximum bandwidth: 20 Mbit/s
ONT line profile Profile name: ftth
T-CONT ID: 4
GEM port ID for management services: 11
GEM port ID for voice services: 12
GEM port ID for video services: 13
GEM port ID for Internet access services: 14
ONT service
profile
Profile name: ftth
ONT port capability set: adaptive
Network
topology data
PON port: 0/1/0
ONT IDs: 1 and 2
Procedure
Step 1 Configure GPON ONT profiles.
GPON ONT profiles include the DBA profile, line profile, service profile, and alarm profile.
l DBA profile: A DBA profile describes GPON traffic parameters. A T-CONT is bound to a
DBA profile for dynamic bandwidth allocation, improving upstream bandwidth utilization.
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
9 FTTH Configuration
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
582
To Next Page
Loading...
Need help?
General
