EasyManuals Logo
Home>Huawei>Control Unit>SmartAX MA5600T

Huawei SmartAX MA5600T User Manual

Huawei SmartAX MA5600T
1979 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #1803 background imageLoading...
Page #1803 background image
huawei(config)#interface vlanif 2005
huawei(config-if-vlanif2005)#ipv6 address 2001:0db8:0008::13/64
huawei(config-if-vlanif2005)#quit
Step 2 Configure static routes for the communication between the OLT and its upper-layer devices.
huawei(config)#ipv6 route-static 2001:0db8:0006::/64 2001:0db8:0008::7/64 //CM
management packets are forwarded through the Layer 3 interface of VLAN 2005.
huawei(config)#ipv6 route-static 2001:0db8:0011::/64 2001:0db8:0007::6/64 //
DHCP packets are forwarded through the Layer 3 interface of VLAN 2004.
NOTE
Configure static routes on the router connected to the OLT. In addition, add the static routes to dynamic ones.
----End
Result
The OLT can communicate with its upper-layer devices. To check network connectivity between
two devices, run the ping ipv6 and tracert ipv6 commands.
The configured static routes can be queried in an IPv6 routing table by running the display ipv6
routing-table command.
16.4.2.7 Adding a D-CMTS to an OLT
You can configure a distributed cable modem termination system (D-CMTS) only after adding
it to an optical line terminal (OLT).
Prerequisites
The MA5633 management policy is set to stand-alone. To do so, run the sysman centralized-
mgmt primary command.
Context
l When adding a D-CMTS to an OLT, bind the following profiles to the D-CMTS: dynamic
bandwidth allocation (DBA) profile, line profile, and alarm profile. For details about the
functions and configuration method of each profile, see Table 16-41.
Table 16-41 D-CMTS profiles
Profile Function Command
DBA
profile
Describes GPON traffic
parameters. A transmission
container (T-CONT) is bound to
a DBA profile for dynamic
bandwidth allocation. This
improves the upstream
bandwidth usage.
Command for querying a DBA profile:
display dba-profile
Command for adding a DBA profile:
dba-profile add
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
16 OptiCable D-CMTS Configuration (MA5633 Working as
a Standalone NE)
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1778

Table of Contents

Other manuals for Huawei SmartAX MA5600T

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei SmartAX MA5600T and is the answer not in the manual?

Huawei SmartAX MA5600T Specifications

General IconGeneral
BrandHuawei
ModelSmartAX MA5600T
CategoryControl Unit
LanguageEnglish

Related product manuals