Huawei SmartAX MA5600T User Manual

Table 15-6 Data plan for the upper-layer devices of the OLT
Item IP Address
Layer 3 interfaces
connecting the router to
the OLT
l Forwarding DHCP and broadband packets: 11.11.11.11
l Forwarding CM management, VoD, and multicast packets:
11.11.12.11
IP addresses of DHCP
servers
l DHCP server assigning IP addresses to CMs and MTAs:
192.168.10.10-192.168.10.11
l DHCP server assigning IP addresses to PCs and STBs:
192.168.10.12-192.168.10.13
IP address of the TFTP
server
192.168.5.10-192.168.5.13
Procedure
Step 1 Set the IP addresses of Layer 3 VLAN interfaces.
huawei(config)#vlan 100 smart
huawei(config)#interface vlanif 100
huawei(config-if-vlanif100)#arp proxy enable
huawei(config-if-vlanif100)#ip address 10.10.224.1 255.255.255.0 description
docsis //Set the IP address of the DHCP domain gateway for CMs.
huawei(config-if-vlanif100)#ip address 10.100.224.1 255.255.255.0 sub description
pktc //Set the IP address of the DHCP domain gateway for MTAs.
huawei(config-if-vlanif100)#ip address 10.200.160.1 255.255.255.0 sub description
stb //Set the IP address of the DHCP domain gateway for STBs.
huawei(config-if-vlanif100)#ip address 10.100.187.1 255.255.255.0 sub description
default //Set the IP address of the DHCP domain gateway for paid PCs.
huawei(config-if-vlanif100)#ip address 10.100.8.1 255.255.255.0 sub description
default //Set the IP address of the DHCP domain gateway for overdue PCs.
huawei(config-if-vlanif100)#quit
Step 2 Configure the working mode of the DHCP relay to Layer 3 Option 60.
In DHCP Option 60 mode, a DHCP server group is selected according to the Option 60 domain
name in DHCP packets. Users in this mode are identified by domain information of packets,
which differentiates various service types in a VLAN. Ensure that the Option 60 domain name
and the DHCP server group bound to the Option 60 domain name are configured beforehand.
huawei(config)#dhcp mode layer-3 Option60
Several minutes may be required and no action can be taken during this period
Are you sure to perform this operation? (y/n)[n]: y
Step 3 Enable the DHCP option82 feature.
The DHCP feature does not have any mechanism for authentication or security. Thus, the DHCP
feature encounters many security problems when it is used in the network. To solve these
problems, the DHCP option82 is introduced.
huawei(config)#dhcp option82 enable
Step 4 Set the IP addresses of the servers in a DHCP server group.
huawei(config)#dhcp-server 0 ip 192.168.10.10 192.168.10.11 //Configure DHCP
server group 0 to assign IP addresses to CMs and MTAs.
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
15 OptiCable D-CMTS Configuration (MA5633 Working as
a Remote Extended Frame)
Issue 01 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1541

Huawei SmartAX MA5600T Specifications

General

Brand	Huawei
Model	SmartAX MA5600T
Category	Control Unit
Language	English