7-8 CHASSIS
• Disconnect the coupler
î›§
D.
• Remove the cowling blace
î›§
E.
• Remove the combination meter. ("8-29)
INSTALLATION
Install the exterior parts in the reverse order of removal. Pay
attention to the following points:
• Install the wind screen brace
î›§
1 as shown in the photograph.
NOTE:
Install the larger diameter bolts on the wind screen brace attach-
ing section
î›§
A
.
NOTE:
The wind screen height can be adjusted by changing the wind
screen brace installed position.
PartShark.com
877-999-5686