CHASSIS 7-45
REMOVAL
• Raise the rear wheel off the ground and support the motorcy-
cle with a jack or wooden block.
• Remove the pre-load adjuster
î›§
1.
• Remove the cushion lever rod bolts/nuts and the cushion rods
î›§
2.
• Disconnect the pre-load adjuster hose from the clamp
î›§
3.
• Remove the rear shock absorber upper mounting bolt
î›§
4.
• Remove the rear shock absorber lower mounting bolt
î›§
5.
• Remove the rear shock absorber
î›§
6.
PartShark.com
877-999-5686