Xerox VersaLink B7025 Service Manual

April 2017
2-127
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
016-401, 016-403, 016-430
Status Indicator RAPs
Launch Issue
016-401 802.1x EAP Type Not Supported RAP
016-401 802.1x Authentication method mismatch (the authentication server does not support
the authentication method of the machine). A fail signal, which indicates that the authentication
method set in the machine cannot be processed, was received from the authentication device
switch that is physically connected to the machine via the network.
Procedure
Advise the customer to:
1. Set the authentication method of the machine to be the same as the one set in the
authentication server.
2. Check the 802.1x authentication method from the UI.
016-403, 016-430 802.1x Certificate Failure RAP
016-403 802.1x authentication certificate mismatch. The root server certificate for the authenti-
cation server is not stored in the machine or it is mismatched.
016-430 The route certificate of the server certificate (for network 2) of the authentication
server is not stored in the machine or it does not match.
Procedure
Advise the customer to:
1. Store the root server certificate for the authentication server in the machine.
2. If the root certificate of the server certificate cannot be obtained, disable the 802.1x set-
ting item ‘Verify Server Certificate’ in the device.

Xerox VersaLink B7025 Specifications

General

Brand	Xerox
Model	VersaLink B7025
Category	All in One Printer
Language	English