Xerox VersaLink B7025 Service Manual

April 2017
2-174
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
016-701, 016-702
Launch Issue
Status Indicator RAPs
016-701 Out of ART EX Memory RAP
016-701 Insufficient memory was detected while using the ART EX.
Procedure
Perform the steps that follow:
1. Advise the customer to:
a. Increase the allocated memory of the ART EX.
b. Lower the print mode.
c. Lower the resolution.
d. Set Page Print mode to Enabled.
e. Execute Image Compression in the Graphics tab of the printer driver.
2. If the fault persists, reload the software, GP 4.
016-702 Out of Page Buffer RAP
016-702 Unable to compress any page due to insufficient print page buffer.
Procedure
Perform the steps that follow:
1. Advise the customer to:
a. Set Print Mode to High Speed and reduce the print resolution. Retry the operation.
b. Increase the memory to increase the page buffer.
c. Retry the operation in Print Page Mode.
2. If the fault persists, reload the software, GP 4.

Xerox VersaLink B7025 Specifications

General

Brand	Xerox
Model	VersaLink B7025
Category	All in One Printer
Language	English