April 2017
2-545
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
118-310, 118-311
Status Indicator RAPs
Launch Issue
118-310, 118-311 Internal Fail RAP
118-310 An internal error was detected during initialization of the IPSEC.
118-311 GCP related fatal error.
Procedure
WARNING
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
Perform the steps that follow:
1. Switch off, then switch on the machine, GP 10.
2. Ensure that all connectors on the drive PWB, PL 1.10 Item 3 and the ESS PWB, PL 3.10
Item 6 are securely connected. Ensure all surface mounted modules on both PWBs are
securely connected.
3. Reload the software, GP 4.
4. Perform the OF2 Special Boot Modes RAP.
To Next Page
Loading...
Need help?
General
