Xerox VersaLink B7025 Service Manual

April 2017
2-45
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
005-907, 005-908
Status Indicator RAPs
Launch Issue
005-907 DADF Pre Registration Sensor Static Jam RAP
BSD-ON: BSD 5.4 Document Feeding (1 of 2)
005-907 DADF pre registration sensor detected paper when powering on, closing the feeder
cover or closing the DADF.
Procedure
WARNING
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
Refer to the procedure that follows as necessary:
• GP 7 How to Check a Sensor.
Perform the steps that follow:
1. Enter dC330, code 005-206. Check the DADF pre registration sensor, PL 5.70 Item 3.
2. If the fault persists, install a new DADF PWB, PL 5.10 Item 11
005-908 DADF Registration Sensor Static Jam RAP
BSD-ON: BSD 5.6 Document Scan, Invert and Exit Transportation
005-908 DADF registration sensor detected paper when powering on, closing the feeder cover
or closing the DADF.
Procedure
WARNING
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
Refer to the procedure that follows as necessary:
• GP 7 How to Check a Sensor.
Perform the steps that follow:
1. Enter dC330, code 005-110. Check the DADF registration sensor, PL 5.70 Item 3.
2. If the fault persists, install a new DADF PWB, PL 5.10 Item 11.

Xerox VersaLink B7025 Specifications

General

Brand	Xerox
Model	VersaLink B7025
Category	All in One Printer
Language	English