Xerox VersaLink B7025 Service Manual

April 2017
2-137
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
016-505, 016-507, 016-508
Status Indicator RAPs
Launch Issue
016-505 POP Authentication Fail for Redirector RAP
016-505 Incorrect POP Server authentication information was detected.
Procedure
Perform the steps that follow:
1. Advise the customer to specify the correct POP Server authentication information.
2. If the fault persists, perform the 016A Scan to Network Error Entry RAP.
016-507, 016-508 Image Log Send Fail RAP
016-507 A log image transfer fails, making it impossible to continue a target job which will con-
sist of created images.
016-508 A log image transfer fails, making it impossible to continue an image transfer job.
Procedure
Perform the steps that follow:
1. Advise the customer to check the state of the destination image log control server and
that of the network. Clear any factor preventing image logs from being transferred to the
image log control server.
2. Initialise the hard disk. Refer to dC355 Hard Disk Diagnostics.
3. If the fault persists, install a new hard disk, PL 3.10 Item 2.

Xerox VersaLink B7025 Specifications

General

Brand	Xerox
Model	VersaLink B7025
Category	All in One Printer
Language	English