April 2017
2-507
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
116-325, 116-330, 331, 336, 337, 339
Status Indicator RAPs
Launch Issue
116-325 ESS Fan Fail RAP
BSD-ON: BSD 3.9 ESS
116-325 An error occurred in the rotation of the ESS fan.
Procedure
WARNING
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
Perform the steps that follow:
1. Switch off, then switch on the machine, GP 10.
2. Check the wiring between P/J311 on the ESS PWB and the ESS fan for an open or short
circuit, or a loose or damaged connector.
3. If the fault persists, install new components as necessary:
• ESS fan, PL 3.10 Item 9.
• ESS PWB, PL 3.10 Item 6.
116-330, 331, 336, 337, 339 HDD File System Fail RAP
116-330 HDD check at power on detected that an error has occurred or the HDD was not for-
matted.
116-331 A log related error was detected.
116-336 An error was detected when the HDD was accessed.
116-337 Overall SNTP fatal error. Due to an error in software processing, subsequent pro-
cesses cannot be performed.
116-339 When the JBA is started up, the HDD is not installed.
Procedure
Perform the 016-210, 506, 777, 780, 798 HDD Error RAP.
To Next Page
Loading...
Need help?
General
