April 2017
2-15
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
002-500
Status Indicator RAPs
Launch Issue
002-500 UI Error RAP
BSD-ON: BSD 2.1 Control Panel
002-500 CUI scan panel UI detection error.
Procedure
WARNING
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
Perform the steps that follow:
1. Switch off, then switch on the machine, GP 10.
2. Ensure that all connectors on the UI assembly, PL 2.05 Item 7 and the ESS PWB, PL
3.10 Item 6 are securely connected. Ensure that all surface mounted modules on the ESS
PWB are securely connected.
3. Check the wiring between the ESS PWB and the UI assembly.
4. Reload the software, GP 4.
5. If the fault persists, install a new components as necessary:
• UI assembly, PL 2.05 Item 7.
• ESS PWB, PL 3.10 Item 6.
To Next Page
Loading...
Need help?
General
