Xerox VersaLink B7025 Service Manual

April 2017
4-96
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
REP 13.2, REP 13.3
Launch Issue
Repairs and Adjustments
Replacement
1. Insert the hole punch assembly rear locating pin into the H-transport frame.
2. The replacement is the reverse of the removal procedure.
3. Perform ADJ 13.1 Finisher LX Hole Punch Position.
REP 13.3 H-Transport Belt
Parts List on PL 13.08
Removal
WARNING
Switch off the electricity to the machine. Refer to GP 10. Disconnect the power cord
from the customer supply while performing tasks that do not need electricity. Electricity
can cause death or injury. Moving parts can cause injury.
1. Remove the H-transport assembly, REP 13.1.
2. Remove the H-transport rear cover, PL 13.06 Item 9.
3. Remove the H-transport belt, Figure 1:
a. Loosen two screws to release the belt tension (1).
b. Remove the belt (2).
Figure 1 H-transport belt removal
Replacement
The replacement is the reverse of the removal procedure.

Xerox VersaLink B7025 Specifications

General

Brand	Xerox
Model	VersaLink B7025
Category	All in One Printer
Language	English