Xerox VersaLink B7025 Service Manual

April 2017
2-25
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
003-757, 931, 934, 003-760, 003-761
Status Indicator RAPs
Launch Issue
003-757, 931, 934 400dpi Cannot be Scanned RAP
003-757 400/600dpi unavailable for DADF mixed 2-sided mode scan.
003-931 For scanning in the DADF mix duplex mode, 400dpi and 600dpi are not available.
003-934 For scanning in the DADF mix duplex mode, 400dpi and 600dpi are not available
(when the next document exists).
Procedure
Perform the steps that follow:
1. Advise the customer to perform scanning below 300 dpi resolution or perform scanning in
other than mixed mode.
2. If the fault persists, reload the software, GP 4.
003-760, 003-761 Scan Settings Error RAP
003-760 The job properties are incorrect.
003-761 Tray selection error.
Procedure
Perform the steps that follow:
1. Advise the customer to correct the job properties.
2. If the fault persists, reload the software, GP 4.

Xerox VersaLink B7025 Specifications

General

Brand	Xerox
Model	VersaLink B7025
Category	All in One Printer
Language	English