AudioCodes Media 800 MSBR User Manual

Version 6.6 119 Mediant 800 MSBR
User's Manual 14. Network
2. IP Routing table: Two routes are configured for directing traffic for subnet
201.201.0.0/16 to 192.168.11.10, and all traffic for subnet 202.202.0.0/16 to
192.168.11.1:
Example of IP Routing Table
Destination IP
Address
Prefix Length
Gateway IP
Address
Metric Interface Name
201.201.0.0 16 192.168.11.10 1 -
202.202.0.0 16 192.168.11.1 1 -
3. The NTP applications remain with their default application types.
14.1.4.2 VoIP Interface per Application Type
This example describes the configuration of three VoIP interfaces; one for each application
type:
1. Multiple Interface table: Configured with three interfaces, each for a different
application type, i.e., one for OAMP, one for Call Control, and one for RTP Media, and
each with a different VLAN ID and default gateway:
Example of VoIP Interfaces per Application Type in Multiple Interface Table
Index
Application
Type
IP Address
Prefix
Length
Gateway
VLAN
ID
Interface
Name
0 OAMP 192.168.0.2 16 192.168.0.1 1 ManagementI
F
1 Control 200.200.85.14 24 200.200.85.1 200 myControlIF
2 Media 211.211.85.14 24 211.211.85.1 211 myMediaIF
2. IP Routing table: A routing rule is required to allow remote management from a host
in 176.85.49.0 / 24:
Example IP Routing Table
Destination IP
Address
Prefix Length
Gateway IP
Address
Metric
Interface
Name
176.85.49.0 24 192.168.11.1 1 -
3. All other parameters are set to their respective default values. The NTP application
remains with its default application types.
14.1.4.3 VoIP Interfaces for Combined Application Types
This example describes the configuration of multiple interfaces for the following
applications:

One interface for the OAMP application.

Interfaces for Call Control and Media applications.
1. Multiple Interface table:

AudioCodes Media 800 MSBR Specifications

General

Brand	AudioCodes
Model	Media 800 MSBR
Category	Network Router
Language	English