66.1.6 DNS Parameters
The Domain name System (DNS) parameters are described in the table below.
DNS Parameters
Parameter Description
Internal DNS Table
Web: Internal DNS Table
EMS: DNS Information
CLI: configure voip >
control-network dns
Dns2Ip
[DNS2IP]
This table parameter defines the internal DNS table for resolving host
names into IP addresses. Up to four different IP addresses (in dotted-
decimal notation) can be assigned to a host name.
The format of this parameter is as follows:
[Dns2Ip]
FORMAT Dns2Ip_Index = Dns2Ip_DomainName,
Dns2Ip_FirstIpAddress, Dns2Ip_SecondIpAddress,
Dns2Ip_ThirdIpAddress, Dns2Ip_FourthIpAddress;
[\Dns2Ip]
For example:
Dns2Ip 0 = DnsName, 1.1.1.1, 2.2.2.2, 3.3.3.3, 4.4.4.4;
Note: For a detailed description of this table parameter, see
'Configuring the Internal DNS Table' on page 126.
Internal SRV Table
Web: Internal SRV Table
EMS: DNS Information
CLI: configure voip >
control-network dns
Srv2Ip
[SRV2IP]
This table parameter defines the internal SRV table for resolving host
names into DNS A-Records. Three different A-Records can be assigned
to a host name. Each A-Record contains the host name, priority, weight,
and port. The format of this parameter is as follows:
[SRV2IP]
FORMAT SRV2IP_Index = SRV2IP_InternalDomain,
SRV2IP_TransportType, SRV2IP_Dns1, SRV2IP_Priority1,
SRV2IP_Weight1, SRV2IP_Port1, SRV2IP_Dns2, SRV2IP_Priority2,
SRV2IP_Weight2, SRV2IP_Port2, SRV2IP_Dns3, SRV2IP_Priority3,
SRV2IP_Weight3, SRV2IP_Port3;
[\SRV2IP]
For example:
SRV2IP 0 =
SrvDomain,0,Dnsname1,1,1,500,Dnsname2,2,2,501,$$,0,0,0;
Note: For a detailed description of this table parameter, see
'Configuring the Internal SRV Table' on page 127.
66.1.7 DHCP Parameters
The Dynamic Host Control Protocol (DHCP) parameters are described in the table below.
DHCP Parameters
Parameter Description
Web: Enable DHCP
EMS: DHCP Enable
[DHCPEnable]
Enables Dynamic Host Control Protocol (DHCP) functionality.
 [0] Disable (default)
 [1] Enable
Notes:
To Next Page
Loading...
Need help?
General
