Parameter Description
Message Condition
CLI: message-condition
[Classification_Messag
eCondition]
Assigns a Condition rule which can also be used to classify the incoming
SIP dialog.
Note: Condition rules are configured in the Condition Table (see
'Configuring Condition Rules' on page 467).
Operation Rule
Source IP Group ID
CLI: src-ip-group-id
[Classification_SrcIPGr
oupID]
Defines an IP Group to which the incoming SIP dialog request is
assigned if this SIP dialog matches the matching rule.
The default is -1 (i.e., no IP Group is assigned).
Notes:
 The IP Group must be associated with the selected SRD.
 The IP Group is used for SBC routing and manipulations.
 To define IP Groups, see 'Configuring IP Groups' on page 210.
Action Type
CLI: action-type
[Classification_ActionT
ype]
Defines a whitelist or blacklist for incoming SIP dialog requests that
match the characteristics of the classification rule.
 [0] Deny = Blocks incoming SIP dialogs that match the characteristics
of the Classification rule (blacklist).
 [1] Allow = Allows incoming SIP dialogs that match the characteristics
of the Classification rule (whitelist) and assigns it to the associated IP
Group. (default)
31.4.1.1 Classification Based on URI of Selected Header Example
The following example describes how to configure classification of incoming calls to IP
Groups, based on source URI in a specific SIP header.
This example assumes the following incoming INVITE message:
INVITE sip:8000@10.33.4.226 SIP/2.0
Via: SIP/2.0/UDP 10.33.4.226;branch=z9hG4bKVEBTDAHSUYRTEXEDEGJY
From: <sip:100@10.33.4.226>;tag=YSQQKXXREVDPYPTNFMWG
To: <sip:8000@10.33.4.226>
Call-ID: FKPNOYRNKROIMEGBSSKS@10.33.4.226
CSeq: 1 INVITE
Contact: <sip:100@10.33.4.226>
Route: <sip:2000@10.10.10.10.10>,<sip:300@10.10.10.30>
Supported: em,100rel,timer,replaces
P-Called-Party-ID: <sip:1111@10.33.38.1>
User-Agent: Sip Message Generator V1.0.0.5
Content-Length: 0
1. In the Classification table, add the following classification rules:
Index
Source Username
Prefix
Destination
Username Prefix
Destination Host Source IP Group ID
0 333 - - 1
1 1111 2000 10.10.10.10 2
To Next Page
Loading...
Need help?
General
